全志V851s、V853内g2d模块sample深究

文章列表

1. g2d 模块概述

g2d 主要功能：
1）旋转：支持90、180、270旋转；
2）镜像反转：H / V;
3) scale：放缩
4）格式转换：yuv 转 rgb 等，多种格式相互间转换；
5）透明叠加功能：实现两个rgb图片叠加；
6）矩形填充，等诸多功能；

2. g2d 配置
1）源码目录：tina-v853-docker/kernel/linux-4.9/drivers/char/sunxi_g2d

2）make kernel_menuconfig 配置

Device Drivers > Character devices > sunxi g2d driver
按空格键选中【*】
在这里插入图片描述

3）Device Tree 设备树配置
sun8iw21p1.dtsi路径：
tina-v853-docker/kernel/linux-4.9/arch/arm/boot/dts/sun8iw21p1.dtsi

		g2d: g2d@05410000 {compatible = "allwinner,sunxi-g2d";reg = <0x0 0x05410000 0x0 0xbffff>;interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;clocks = <&clk_g2d>;iommus = <&mmu_aw 3 1>;status = "okay";};

status 要设定为“okay” 状态。

4）重新编译内核

mkernel
make -j1 V=s
pack

使用烧录工具PhoenixSuit 将路径：tina-v853-docker/out/v851s/lizard/openwrt/v851s_linux_lizard_uart0.img 下的img 镜像烧录到开发板。

adb shell 打开控制终端查看设备节点G2D：
在这里插入图片描述

5）通过G2D 设备节点，对g2d 进行操作

static int SampleG2d_G2dOpen(SAMPLE_G2D_CTX *p_g2d_ctx)
{int ret = 0;p_g2d_ctx->mG2dFd = open("/dev/g2d", O_RDWR, 0);if (p_g2d_ctx->mG2dFd < 0){aloge("fatal error! open /dev/g2d failed");ret = -1;}return ret;
}

3. 详解 eyesee-mpp 中g2d sample 具体应用
1）eyesee-mpp 中 g2d sample 编译与执行请参考另一篇帖子
链接文本

2）g2d sample 目录
在这里插入图片描述

3）运用 g2d 进行rotation，scale，格式转换
具体实现：将 nv21 格式的1920x1080图转换成rgb888 格式并放缩为640x360 大小。具体用到两个功能，格式转换和放缩。
步骤如下：
1））根据1920x1080 nv21 格式以及 640x360 rgb888 格式申请虚拟地址空间以及转换成物理地址（注意：g2d 转换是在物理地址中完成的）

1920x1080 nv21 格式空间大小（输入文件）：
在这里插入图片描述

Y 占 19201080 = 2073600 字节
UV 占 19201080 / 2 = 1036800 字节

640x360 rgb888 格式空间大小（输出文件）：
RGB 占 6403603 = 691200 字节

另外：虚拟地址转换成物理地址使用如下函数：

g2d_getPhyAddrByVirAddr（）

申请虚拟空间并转换成物理空间完整函数如下：
在文件 tina-v853-docker/platform/allwinner/eyesee-mpp/middleware/sun8iw21/sample/sample_g2d/sample_g2d.c/sample_g2d.c 中

static int PrepareFrmBuff(SAMPLE_G2D_CTX *p_g2d_ctx)
{SampleG2dConfig *pConfig = NULL;unsigned int size = 0;pConfig = &p_g2d_ctx->mConfigPara;p_g2d_ctx->src_frm_info.frm_width = pConfig->mSrcWidth;p_g2d_ctx->src_frm_info.frm_height =  pConfig->mSrcHeight;p_g2d_ctx->dst_frm_info.frm_width = pConfig->mDstWidth;p_g2d_ctx->dst_frm_info.frm_height = pConfig->mDstHeight;size = ALIGN(p_g2d_ctx->src_frm_info.frm_width, 16)*ALIGN(p_g2d_ctx->src_frm_info.frm_height, 16);if(pConfig->mPicFormat == MM_PIXEL_FORMAT_YVU_SEMIPLANAR_420 || pConfig->mPicFormat == MM_PIXEL_FORMAT_YUV_SEMIPLANAR_420){p_g2d_ctx->src_frm_info.p_vir_addr[0] = (void *)g2d_allocMem(size);if(NULL == p_g2d_ctx->src_frm_info.p_vir_addr[0]){aloge("malloc_src_frm_y_mem_failed");return -1;}p_g2d_ctx->src_frm_info.p_vir_addr[1] = (void *)g2d_allocMem(size/2);if(NULL == p_g2d_ctx->src_frm_info.p_vir_addr[1]){g2d_freeMem(p_g2d_ctx->src_frm_info.p_vir_addr[0]);aloge("malloc_src_frm_c_mem_failed");    return -1;}p_g2d_ctx->src_frm_info.p_phy_addr[0] = (void *)g2d_getPhyAddrByVirAddr(p_g2d_ctx->src_frm_info.p_vir_addr[0]); p_g2d_ctx->src_frm_info.p_phy_addr[1] = (void *)g2d_getPhyAddrByVirAddr(p_g2d_ctx->src_frm_info.p_vir_addr[1]);}if(pConfig->mDstPicFormat == MM_PIXEL_FORMAT_RGB_888){size = p_g2d_ctx->dst_frm_info.frm_width * p_g2d_ctx->dst_frm_info.frm_height * 3;p_g2d_ctx->dst_frm_info.p_vir_addr[0] = (void *)g2d_allocMem(size);if(NULL == p_g2d_ctx->dst_frm_info.p_vir_addr[0]){if(p_g2d_ctx->src_frm_info.p_vir_addr[0] != NULL){g2d_freeMem(p_g2d_ctx->src_frm_info.p_vir_addr[0]); }if(p_g2d_ctx->src_frm_info.p_vir_addr[1] != NULL){g2d_freeMem(p_g2d_ctx->src_frm_info.p_vir_addr[1]);}aloge("malloc_dst_frm_y_mem_failed");return -1;}p_g2d_ctx->dst_frm_info.p_phy_addr[0] = (void *)g2d_getPhyAddrByVirAddr(p_g2d_ctx->dst_frm_info.p_vir_addr[0]); }return 0; 
}

2））通过fopen 传菜间两个文件句柄，fd_in fd_out 用来操作输入输出两个文件资源

        p_g2d_ctx->fd_in = fopen(p_g2d_ctx->mConfigPara.SrcFile,"r");if(NULL == p_g2d_ctx->fd_in){aloge("open src file failed");ret = -1;goto _err2;}fseek(p_g2d_ctx->fd_in, 0, SEEK_SET);p_g2d_ctx->fd_out = fopen(p_g2d_ctx->mConfigPara.DstFile, "wb");if (NULL == p_g2d_ctx->fd_out){aloge("open out file failed");ret = -1;goto _err2;}fseek(p_g2d_ctx->fd_out, 0, SEEK_SET);

3））读出 1920x1080 nv21 图资放入虚拟空间

read_len = p_g2d_ctx->src_frm_info.frm_width * p_g2d_ctx->src_frm_info.frm_height;if(pConfig->mPicFormat == MM_PIXEL_FORMAT_YVU_SEMIPLANAR_420|| pConfig->mPicFormat == MM_PIXEL_FORMAT_YUV_SEMIPLANAR_420){size1 = fread(p_g2d_ctx->src_frm_info.p_vir_addr[0] , 1, read_len, p_g2d_ctx->fd_in);if(size1 != read_len){aloge("read_y_data_frm_src_file_invalid");}size2 = fread(p_g2d_ctx->src_frm_info.p_vir_addr[1], 1, read_len /2, p_g2d_ctx->fd_in);if(size2 != read_len/2){aloge("read_c_data_frm_src_file_invalid");}fclose(p_g2d_ctx->fd_in);g2d_flushCache((void *)p_g2d_ctx->src_frm_info.p_vir_addr[0], read_len);g2d_flushCache((void *)p_g2d_ctx->src_frm_info.p_vir_addr[1], read_len/2);}

4））打开g2d 初始化，并开始转换

ret = SampleG2d_G2dOpen(p_g2d_ctx);if (ret < 0){aloge("fatal error! open /dev/g2d fail!");goto _err2;}ret = SampleG2d_G2dConvert(p_g2d_ctx);if (ret < 0){aloge("fatal error! g2d convert fail!");goto _close_g2d;}
//具体转化函数：static int SampleG2d_G2dConvert_scale(SAMPLE_G2D_CTX *p_g2d_ctx)
{int ret = 0;g2d_blt_h blit;g2d_fmt_enh eSrcFormat, eDstFormat; SampleG2dConfig *pConfig = NULL;pConfig = &p_g2d_ctx->mConfigPara;ret = convert_PIXEL_FORMAT_E_to_g2d_fmt_enh(pConfig->mPicFormat, &eSrcFormat);if(ret!=SUCCESS){aloge("fatal error! src pixel format[0x%x] is invalid!", pConfig->mPicFormat);return -1;}ret = convert_PIXEL_FORMAT_E_to_g2d_fmt_enh(pConfig->mDstPicFormat, &eDstFormat);if(ret!=SUCCESS){aloge("fatal error! dst pixel format[0x%x] is invalid!", pConfig->mPicFormat);return -1;}//config blitmemset(&blit, 0, sizeof(g2d_blt_h));if(0 != pConfig->mDstRotate){aloge("fatal_err: rotation can't be performed when do scaling");}blit.flag_h = G2D_BLT_NONE_H;       // angle rotation used
//    switch(pConfig->mDstRotate)
//    {
//        case 0:
//            blit.flag_h = G2D_BLT_NONE_H;   //G2D_ROT_0, G2D_BLT_NONE_H
//            break;
//        case 90:
//            blit.flag_h = G2D_ROT_90;
//            break;
//        case 180:
//            blit.flag_h = G2D_ROT_180;
//            break;
//        case 270:
//            blit.flag_h = G2D_ROT_270;
//            break;
//        default:
//            aloge("fatal error! rotation[%d] is invalid!", pConfig->mDstRotate);
//            blit.flag_h = G2D_BLT_NONE_H;
//            break;
//    }//blit.src_image_h.bbuff = 1;//blit.src_image_h.color = 0xff;blit.src_image_h.format = eSrcFormat;blit.src_image_h.laddr[0] = (unsigned int)p_g2d_ctx->src_frm_info.p_phy_addr[0];blit.src_image_h.laddr[1] = (unsigned int)p_g2d_ctx->src_frm_info.p_phy_addr[1];blit.src_image_h.laddr[2] = (unsigned int)p_g2d_ctx->src_frm_info.p_phy_addr[2];//blit.src_image_h.haddr[] = blit.src_image_h.width = p_g2d_ctx->src_frm_info.frm_width;blit.src_image_h.height = p_g2d_ctx->src_frm_info.frm_height;blit.src_image_h.align[0] = 0;blit.src_image_h.align[1] = 0;blit.src_image_h.align[2] = 0;blit.src_image_h.clip_rect.x = pConfig->mSrcRectX;blit.src_image_h.clip_rect.y = pConfig->mSrcRectY;blit.src_image_h.clip_rect.w = pConfig->mSrcRectW;blit.src_image_h.clip_rect.h = pConfig->mSrcRectH;blit.src_image_h.gamut = G2D_BT601;blit.src_image_h.bpremul = 0;//blit.src_image_h.alpha = 0xff;blit.src_image_h.mode = G2D_PIXEL_ALPHA;   //G2D_PIXEL_ALPHA, G2D_GLOBAL_ALPHAblit.src_image_h.fd = -1;blit.src_image_h.use_phy_addr = 1;//blit.dst_image_h.bbuff = 1;//blit.dst_image_h.color = 0xff;blit.dst_image_h.format = eDstFormat;blit.dst_image_h.laddr[0] = (unsigned int)p_g2d_ctx->dst_frm_info.p_phy_addr[0];blit.dst_image_h.laddr[1] = (unsigned int)p_g2d_ctx->dst_frm_info.p_phy_addr[1];blit.dst_image_h.laddr[2] = (unsigned int)p_g2d_ctx->dst_frm_info.p_phy_addr[2];//blit.dst_image_h.haddr[] = blit.dst_image_h.width = p_g2d_ctx->dst_frm_info.frm_width;blit.dst_image_h.height = p_g2d_ctx->dst_frm_info.frm_height;blit.dst_image_h.align[0] = 0;blit.dst_image_h.align[1] = 0;blit.dst_image_h.align[2] = 0;blit.dst_image_h.clip_rect.x = pConfig->mDstRectX;blit.dst_image_h.clip_rect.y = pConfig->mDstRectY;blit.dst_image_h.clip_rect.w = pConfig->mDstRectW;blit.dst_image_h.clip_rect.h = pConfig->mDstRectH;blit.dst_image_h.gamut = G2D_BT601;blit.dst_image_h.bpremul = 0;//blit.dst_image_h.alpha = 0xff;blit.dst_image_h.mode = G2D_PIXEL_ALPHA;   //G2D_PIXEL_ALPHA, G2D_GLOBAL_ALPHAblit.dst_image_h.fd = -1;blit.dst_image_h.use_phy_addr = 1;ret = ioctl(p_g2d_ctx->mG2dFd, G2D_CMD_BITBLT_H, (unsigned long)&blit);if(ret < 0){aloge("fatal error! bit-block(image) transfer failed[%d]", ret);system("cd /sys/class/sunxi_dump;echo 0x14A8000,0x14A8100 > dump;cat dump");}return ret;
}

5））转化完成后将640x360 rgb888 图资通过fd_out句柄存储起来

if(pConfig->mDstPicFormat == MM_PIXEL_FORMAT_RGB_888){out_len = p_g2d_ctx->dst_frm_info.frm_width * p_g2d_ctx->dst_frm_info.frm_height *3;g2d_flushCache((void *)p_g2d_ctx->dst_frm_info.p_vir_addr[0], out_len);fwrite(p_g2d_ctx->dst_frm_info.p_vir_addr[0], 1, out_len, p_g2d_ctx->fd_out);}

4. 总结转化步骤

通过步骤3中的模块化分析，可以看出g2d 转化大概分为一下步骤：

1）为打开 iomen 初始化；
2）为src以及dst图资申请虚拟地址空间并转换成物理地址空间；
3）将src图资放入虚拟地址空间，然后自动映射到物理地址空间；
4）打开g2d 设备节点进行转换（最重要的一环，可以通过手册分析具体怎么转换的）；
5）将转换好的dst图资保存起来；

V853开发文档手册：https://bbs.aw-ol.com/topic/3291/

全志V851s、V853内g2d模块sample深究

公告

标签

全志V851s、V853内g2d模块sample深究

相关问题

公告

标签